ABOUT US
About Clancy Electrical
Liam Clancy owns and runs Clancy Electrical and is a fully qualified electrician based in Worcester. He has worked in factories, offices, retail premises and private homes, so he is used to a wide range of jobs and settings.
He explains options clearly and agrees honest pricing before work starts, so you know what you are paying for and why. You speak to Liam directly from the first call to the final certificate.
Clancy Electrical has a growing focus on renewable energy and energy-efficient upgrades, including solar PV, battery storage and EV charging.
Qualifications
- EAL Level 2 and Level 3 Electrical Installation
- Level 3 NVQ in Electrical Installation
- AM2-S
- City & Guilds 2391-52 Inspection and Testing
- 18th Edition BS 7671, including Amendment 4
- Level 3 Solar PV
- Level 3 Electrical Energy Storage Systems (battery storage)
- Level 3 EV Charging
- Fully insured

Get a Free Quote
Call Liam or send the form for a free, no-obligation quote.
VIDEO
On Site
RECENT WORK
Recent Work

Consumer Unit and Main Switch Upgrade
New consumer unit with RCBO protection and surge protection, fed from a separate main switch enclosure and linked with neat trunking.

Modern Consumer Unit Installation
Large consumer unit with RCBO protection on each circuit, surge protection and a 100A main switch, wired neatly before the cover goes on.

Finished and Covered
The consumer unit and main switch enclosure with covers fitted and trunking between the two.

Wiring the New Board
Consumer unit mid-installation, with RCBOs and surge protection fitted and each circuit being connected.

Labelled Circuits
Consumer unit with surge protection and a main switch, with every circuit labelled, including lights, sockets and cooker.

Testing at the Board
Liam testing each circuit at a distribution board with a multifunction tester.

Industrial Control Panel
Inside a stainless steel control panel, with a PLC, relays and rows of labelled terminals.

New Socket Circuit
Metal-clad double sockets with USB charging and a 16A industrial socket, run in steel conduit and labelled to their circuit.

Outdoor Double Socket
Weatherproof double socket on an outside wall, with its cable run neatly down the brickwork.

Weatherproof When Closed
The same outdoor socket with its lid shut, keeping rain out when it's not in use.

Outdoor Cable Run
Cable run in conduit along an outside wall to a junction box, protected from the weather.

Lighting Timer Control
Contactor and digital time switch in an enclosure, switching lighting on and off at set times.

LED Lighting Throughout
LED batten lights fitted across the roof steelwork, giving even light over the whole unit.

Wired Data Point
Data outlet fitted beside the broadband master socket, giving a wired internet connection where it's needed.

Data Outlet Termination
Each pair in the data cable connected into the outlet module before the faceplate goes on.

Preparing the Cable
Data cable stripped and its pairs separated at the back box, ready to connect to the outlet.

Workshop Fit-Out
Engineering workshop with LED lighting, steel trunking and power points around the walls.

Board, Isolator and Meter
Distribution board and 400V isolator fitted beside the supply meter, with steel trunking and conduit.

External Speaker Wiring
Wiring for an external horn speaker, with two weatherproof enclosures and cables fixed neatly to galvanised strut.

Meter Cupboard Upgrade
New switch fuse units with trunking fitted in a shared meter cupboard, above the supply meters.

Fused Switch
Fused switch with 80A cartridge fuses, used to isolate and protect a supply.

Commercial Unit Rewire
Industrial unit rewired with LED batten lighting, steel trunking at high level and conduit drops to each socket position.

Conduit Set Out by Laser
Steel conduit run across a concrete ceiling, lined up with a laser level, with fire-resistant cable to a detector.

Straight Drops to Sockets
Steel conduit dropped from the trunking to two socket back boxes, kept straight with a laser line.

Cable Tray Over the Shutter
Cable tray routed up and over a roller shutter door to keep cables clear of the opening.

Cable Tray at High Level
Galvanised cable tray bend at ceiling height, carrying cables around the building.

Emergency Exit Sign
Illuminated exit sign above the door, with a key switch beside it for testing, supplied through steel conduit.

Fire-Resistant Cabling
Red fire-resistant cable and steel conduit fixed to a concrete ceiling, the type of cable used for emergency and alarm circuits.

Three-Phase Board and Isolator
Distribution board alongside a 400V isolator and the supply meter, all linked with steel trunking.

Fitting the New Board
Three-phase distribution board being fixed in place in a plant room, beside the supply cut-out and meter.

Levelled and Fixed
The board checked with a spirit level before the circuits are connected.

Fully Wired
The same board finished, with every circuit connected and cables run neatly through trunking.

Board with Armoured Supplies
Three-phase board with a main switch disconnector and armoured cables entering through glands at the bottom.

Three-Phase Incoming Supply
Switch disconnector with the neutral and three phase supply cables connected, cable glands below.

Floor-Standing Board
Large floor-standing three-phase distribution board with its door open.

32A Three-Phase Socket
32A three-phase socket with a built-in isolator, fed in steel conduit and labelled back to its board.

Power at the Pillar
Three-phase socket with an isolator and two USB double sockets on a workshop pillar, fed in twin steel conduits.

Motor Reconnection
Motor terminal box rewired with labelled cores and crimped connections in a production plant.

Pump Motor Wiring
Pump motor terminal box reconnected with crimped connections and a new cable gland.

Factory Control Cabinet
Large stainless steel control cabinet with motor drives on a production floor.

Machinery Isolator
Rotary isolator in a weatherproof box, with armoured cables entering through brass glands, on a steel mounting plate.

Plant Room Control Panel
Open control panel in a plant room, with indicator lamps on the door showing each circuit's status.

Motor Starters and Drives
Rows of motor starters above speed drives, each one labelled to the motor it controls.

Industrial Control Panels
Row of control cabinets wired with motor drives and starters in an industrial workshop.

Temporary Sockets for Drying Equipment
Four metal-clad sockets on a temporary board, each labelled for drying equipment, with armoured cable supplies.

Power for a Site Heater
Three-phase industrial socket with its own isolator, run in steel conduit and powering a 15kW heater.
Ready to Discuss Your Electrical Work?
Call Liam or send the form for a free, no-obligation quote.
